Sunday, February 17. 10 A.M.
32K and 10K, Classic. Mass start
Base: LF10 Green
GLider: HF10 or MF10 Green
Topcoat: HF13 Block, 2 layers. 1st layer rub on then iron through a sheet of fiberlene. 2nd layer, rub on and then hand-cork. Let cool, and polish.
Gripwax: Clean and sand bases. Apply Base Wax Extra, and iron into the gripzone. Clean excess from grooves and edges. Apply several layers of Synthetic Green, and test. If not enough grip, add several layers of RF Blue. If grip was good with Synthetic Green alone, then finish with several more layers of Tar Green.